ChromaFlo Flow Enhancer ZZ6000

This flow enhancing additive is for brush applications of 1 Shot Lettering Enamels and Bulletin Colors. Not to be mistaken as a reducer, when used sparingly ChromaFlo will increase brush control, decrease brush drag and enhance flow and leveling characteristics. It is especially suitable for letting and pinstriping applications. Do not use in airbrush or spray applications.


Low Temp Reducer ZZ6001

Low Temp Reducer is formulated to improve flow and leveling at low temperatures by reducing viscosity and accelerating the evaporation process without significantly reducing the quality of the coating. It is ideal for spray and airbrush applications of 1 Shot Lettering Enamels, Bulletin Colors and Pearlescent Enamels.


High Temp Reducer ZZ6002

High Temp Reducer is formulated to improve flow and leveling at high temperatures by reducing viscosity and retarding the evaporation process without significantly reducing the quality of the coating. It is ideal for lettering, graphics and pin striping applications of 1 Shot Lettering Enamels, Bulletin Colors and Pearlescent Enamels.


Hardener 4007

Now available in a half pint size! Hardener 4007 is designed to accelerate drying time for 1 Shot Lettering Enamels, Pearlescent Enamels, Background Enamels and Bulletin Colors. In many cases it can improve adhesion qualities, extend color life and increase gloss retention. It is also required when using any enamel or urethane topcoats over catalyzed 1 Shot.


Clear Flattening Paste 4329500

When mixed with 1 Shot Lettering Enamels, Pearlescent Enamels or Bulletin Colors, Clear Flattening Paste will modify gloss levels. A 1:1 mix ratio will result in a nearly dead flat finish. Lesser amounts will yield varying degrees of gloss from semi-gloss to eggshell.